PoolshadeTM Specifications

Sizes:
Vary based on model and according to how the units are setup.
Flexible positioning allows for a variable span from around 14 to 21 feet.
Center height varies depending on the position of the uprights.

Tube Structure:
Manufactured out of multi layered seamless  flexible tubing. Each tube end is fitted with a pressure seal unit and 2 feet of 3/8 ID tubing. Two inflation valves are attached to the ends of the tubes.

Air Pressure:
5-7 PSI operational pressure.
12 PSI test completed on each tube at factory.
20 PSI expected burst pressure.

Shade Fabric:
Knitted highdensitity Polyethylene fabric. Blocks up to 94 % of UV Rays.
Provides 88% shading capability.

Spherical Stands:
4 spherical stands Diameter = 20", Rotational molded Polyethylene construction. Accepts ends of tubes in preformed openings.
Access for filling spheres with water for holding capability.
 
Stand Retainers:
 A total of 4 are provided with each unit to eliminate movement.
18" in diameter and molded from a heavy rubber like material.
 
Wind Resistance:
The structure withstands 65+mph winds. Higher wind conditions could "bend" the structure temporarily but not damage it.

.